The following pdf document provides step-by-step documentation on replacing the rear shocks on a 2007 Honda Accord.
Mechanical
Starter Replacement
Here is a step-by-step write-up on my experience replacing the starter on a 2007 4CYL Honda Accord:
There is also a write-up on rebuilding the starter in the Rebuilds section.
Spark Plug Replacement
Here is a brief guide to replacing the spark plugs on a 4CYL 7th Generation Accord:
Lower Control Arm Bushing Replacement
Here is a step-by-step write-up on my experience replacing the lower control arm bushings:
lower-control-arm-bushings.pdf
Add your comments, experiences or additional tips below!
Water Pump Replacement
Water pump replacement is a good starter project. It is pretty straightforward, there are no special tools required and there shouldn’t be any rusty fasteners to deal with. Often a failing water pump makes a clattering noise or rattling noise. In addition, sometimes a failing pump will have noticeable play in the pulley (with the serpentine belt removed) or may start leaking. The following document has a step-by-step write-up on my experience replacing the water pump:
water-pump-and-thermostat-diy.pdf
Please add your comments, experiences or tips!
Upper Ball Joint Replacement
The upper ball joint is not independently replaceable (at least with an OEM part) but instead the entire upper control arm must be replaced as a unit. The following PDF has a step-by-step write-up on my experience replacing the upper control arm:
replacing-the-upper-ball-joint.pdf
Feel free to add your comments or additional tips!
Lower Ball Joint Replacement
Here is a step-by-step procedure on my experience replacing the lower ball joint. You will need a C-Press and the appropriate adapters in order to press out the the old ball joint and press in the new one.
lower-ball-joint-replacement.pdf
Feel free to add your comments or additional tips below!